Pro/rNGINEER Wildfire Tips & Tutorial (Pro/E Wildfire 4.0, Wildfire 3.0, Wildfire 2.0 and 2001)

Articles

class="gkFeaturedItemTitle" Pro/ENGINEER Wildfire 4.0 New Capabilities

  • Created on Wednesday, 16 January 2008 07:00
  • Written by Administrator

PTC: Announcing the Exciting New Capabilities in Pro/ENGINEER Wildfire 4.0

Pro/ENGINEER Wildfire 4.0 logo

Pro/ENGINEER Wildfire 4.0 is scheduled to be released in the 1st Quater of 2008. With this new announcement from PTC, it shows that the Wildfire 4.0 released date is closer.

Below are some new capbilties in Pro/ENGINEER Wildfire 4.0 >>


Read more: Pro/ENGINEER Wildfire 4.0 New Capabilities

class="gkFeaturedItemTitle" TUTORIAL: Pro/ENGINEER Wildfire Reference Pattern

  • Created on Tuesday, 09 October 2007 00:00
  • Written by Administrator

TUTORIAL: Pro/ENGINEER Wildfire Reference Pattern

Version: Pro/E Wildfire, Wildfire 2.0, Wildfire 3.0, Wildfire 4.0

Pro/ENGINEER Wildfire Reference Pattern dashboard

This tutorial shows you the Pro/ENGINEER Wildfire reference type pattern tool and the requirement to get it works. Download the ProE part file used in this tutorial here (ProE file: reference pattern.prt ).

Read more: TUTORIAL: Pro/ENGINEER Wildfire Reference Pattern

class="gkFeaturedItemTitle" TUTORIAL: About Pro/ENGINEER Wildfire Boundary Blend Feature

  • Created on Friday, 28 September 2007 11:01
  • Written by Administrator

TUTORIAL: About Pro/ENGINEER Wildfire Boundary Blend Feature

Version: Pro/E Wildfire, Wildfire 2.0, Wildfire 3.0, Wildfire 4.0

Boundary blend is an advanced surfacing tool in Pro/ENGINEER. Starting from Pro/E Wildfire, boundary blend has enhanced with new dashboard interface.

Pro/ENGINEER Wildfire Boundary Blend Feature

Boundary blend allows you to create a quilt from boundaries in one or two directions (U & V). The minimum curves / edges for one direction boundary blend quilt are 2 and the minimum curves / edges for two direction boundary blend quilt are 3. Apart of that, internal curves let you to create smooth boundary blend quilt thru the internal curves.

Read more: TUTORIAL: About Pro/ENGINEER Wildfire Boundary Blend Feature

class="gkFeaturedItemTitle" TUTORIAL: Pro/ENGINEER Wildfire Axis Pattern (Circular Pattern)

  • Created on Wednesday, 26 September 2007 10:38
  • Written by Administrator

TUTORIAL: Pro/ENGINEER Wildfire Axis Pattern (Circular Pattern)

Version: Pro/E Wildfire 2.0, Wildfire 3.0, Wildfire 4.0

Pro/E Wildfire Axis Pattern

This tutorial shows you the steps how to create a circular pattern using the axis type pattern in Pro/ENGINEER Wildfire 2.0, Wildfire 3.0 and Wildfire 4.0. Download the ProE part file used in the following axis pattern tutorial here (ProE file: axis pattern start.prt ).

Read more: TUTORIAL: Pro/ENGINEER Wildfire Axis Pattern (Circular Pattern)

class="gkFeaturedItemTitle" TIPS: Pro/ENGINEER Wildfire edge_display_quality config.pro option

  • Created on Tuesday, 25 September 2007 11:15
  • Written by Administrator

TIPS: Pro/ENGINEER Wildfire edge_display_quality config.pro option

Version: ProE 2001, Wildfire, Wildfire 1.0, Wildfire 2.0, Wildfire 4.0

Pro/ENGINEER Wildfire edge_display_quality config.pro option -low
edge_display_quality = Low

Pro/ENGINEER Wildfire edge_display_quality config.pro option - very high
edge_display_quality = Very High

edge_display_quality config.pro option controls the edge display quality for wireframe and hidden-line in Pro/E.

The values for edge_display_quality config.pro option are

Low - Decreases tessellation from normal
Medium * - Normal quality of edge display.
High - Increases tessellation by 2.
Very_high - Increases tessellation by 3.


* default value

Setting the value to Low will speed up the display but scarifying the display quality. Very High value gives you smooth edge but it consumes more graphic memories.

Subcategories

ProENGINEERtips.com is an independent website providing tips and tutorials for Pro/ENGINEER users.
ProENGINEER version covered: ProE 2001, Wildfire, wildfire 2.0, Wildfire 3.0 and Wildfire 4.0
Pro/ENGINEER Wildfire and Pro/INTRALINK are the registered trademark of PTC.
© 2006 - 2012 www.proengineertips.com

Top Desktop version


Deprecated: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in /home/proe/public_html/libraries/joomla/filter/input.php on line 652

Deprecated: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in /home/proe/public_html/libraries/joomla/filter/input.php on line 654