Pro/rNGINEER Wildfire Tips & Tutorial (Pro/E Wildfire 4.0, Wildfire 3.0, Wildfire 2.0 and 2001)

TIPS: Erase Edge Display in Pro/ENGINEER Drawing

TIPS: Erase Edge Display in Pro/ENGINEER Drawing

Version: Pro/E Wildfire, Wildfire2.0, Wildfire3.0

Drawing view is displayed as single entity in Pro/ENGINEER. So, you are not able to select and delete the lines / edges as how drafting software does.

Pro/E erase edge in view

Below is a quick tip showing how to erase edges in Pro/ENGINEER drawing.


1. In drawing mode, click View > Drawing Display > Edge Display

Pro/E erase edge command

2. Menu manager will appear to you. Pick Erase Line to activate the erase command.

Pro/E erase edge menu manager

3. Pick the lines which you wish to erase and then click the OK in the small dialog box to confirm.

Pro/E erase edge in view

Pro/E erase edge confirm

4. The edges / lines will now disappear from the drawing view.

Pro/E erase edge in view

To enable back the erased line, pick the desire style in the menu manager and select the line again. is an independent website providing tips and tutorials for Pro/ENGINEER users.
ProENGINEER version covered: ProE 2001, Wildfire, wildfire 2.0, Wildfire 3.0 and Wildfire 4.0
Pro/ENGINEER Wildfire and Pro/INTRALINK are the registered trademark of PTC.
© 2006 - 2012

Top Desktop version