Pro/rNGINEER Wildfire Tips & Tutorial (Pro/E Wildfire 4.0, Wildfire 3.0, Wildfire 2.0 and 2001)

TUTORIAL: Mirror Part command in Pro/ENGINEER Wildfire 3.0

TUTORIAL: Mirror Part command in Pro/ENGINEER Wildfire 3.0

Version: ProE Wildfire 3.0, Wildfire 4.0

A new mirror part command is created in Pro/ENGIEER Wildfire 3.0 to reduce the steps of creating a mirror part. Compared to the Pro/ENGINEER Wildfire 2.0 which needs an assembly as the medium, this improvement has made the mirror part creation straight forward and simple.

ProE Wildfire mirror part command

Mirror part command is a new improvement in ProE Wildfire 3.0 and this command will be continued in ProE Wildfire 4.0, Wildfire 5.0 and above. The following tutorial shows you the steps to create mirror part using the new mirror part command.


1. Open a part file which you want to create a mirror of it.

ProE Wildfire mirror part - right

2. Pick File > Mirror Part from the top menu.

ProE Wildfire mirror part command

3. The mirror part dialog box appears for you to set the options. You can choose to create a mirror for geometry only or include all feature data.

ProE Wildfire mirror part dialog box

4. Pick the OK button when you are done. The mirror part is created and appears as the active window. Remember to save the mirror part before exit.

ProE Wildfire mirror part - left is an independent website providing tips and tutorials for Pro/ENGINEER users.
ProENGINEER version covered: ProE 2001, Wildfire, wildfire 2.0, Wildfire 3.0 and Wildfire 4.0
Pro/ENGINEER Wildfire and Pro/INTRALINK are the registered trademark of PTC.
© 2006 - 2012

Top Desktop version