Pro/rNGINEER Wildfire Tips & Tutorial (Pro/E Wildfire 4.0, Wildfire 3.0, Wildfire 2.0 and 2001)

TUTORIALS: About the Pattern Feature in Pro/ENGINEER Wildfire

TUTORIALS: About the Pattern Feature in Pro/ENGINEER Wildfire

Version: Pro/E Wildfire, Wildfire 2.0, Wildfire 3.0, Wildfire 4.0

Pattern is very useful when you need to create a series of features by varying its dimensions. You can create pattern for a single feature, a group of features or another pattern feature in Pro/ENGINEER Wildfire. (* Pattern for a pattern feature only available in Pro/E Wildfire 3.0, Wildfire 4.0 and above)

 

There are 7 types of pattern in Pro/ENGINEER Wildfire 4.0. Among thus, Dimensional Pattern, Reference Pattern and Table Pattern were carried from Pro/E 2001. Fill Pattern was introduced in the first version of Pro/E Wildfire and being upgraded in Pro/E Wildfire 3.0. Directional Pattern and Axis Pattern were introduced in Pro/E Wildfire 2.0 and Curve Pattern in Pro/E Wildfire 3.0.

Below are the complete tutorials list for pattern feature in Pro/ENGINEER Wildfire Advanced Modeling.

TUTORIAL: Dimensional Pattern for Linear Dimensions in Pro/ENGINEER Wildfire

TUTORIAL: Dimensional Pattern for Angular Dimensions in Pro/ENGINEER Wildfire
TUTORIAL: Advanced Dimensional Pattern in Pro/ENGINEER Wildfire (coming soon)
TUTORIAL: Dimensional Pattern with Reference in Pro/ENGINEER Wildfire (coming soon)
TIPS: Positive and Negative Direction in Pro/ENGINEER Dimensional Pattern 

TUTORIAL: Directional Pattern in Pro/ENGINEER Wildfire 2.0 (Rectangular Pattern)  

TUTORIAL: Axis Pattern in Pro/ENGINEER Wildfire 2.0 (circular Pattern) (coming soon)

TUTORIAL: Reference Pattern in Pro/ENGINEER Wildfire (coming soon)

TUTORIAL: Table Pattern in Pro/ENGINEER Wildfire (coming soon)

TUTORIAL: Fill Pattern in Pro/ENGINEER Wildfire (coming soon)
TUTORIAL: Fill Pattern with Follow Surface Options in Pro/E Wildfire 3.0 (coming soon)

TUTORIAL: Curve Pattern in Pro/ENGINEER Wildfire 3.0, Wildfire 4.0 and above

TIPS: Pro/ENGINEER Wildfire Exclude Pattern Instances

TIPS: Speed up the Pattern Regeneration Time in Pro/ENGINEER

ProENGINEERtips.com is an independent website providing tips and tutorials for Pro/ENGINEER users.
ProENGINEER version covered: ProE 2001, Wildfire, wildfire 2.0, Wildfire 3.0 and Wildfire 4.0
Pro/ENGINEER Wildfire and Pro/INTRALINK are the registered trademark of PTC.
© 2006 - 2012 www.proengineertips.com

Top Desktop version