Pro/rNGINEER Wildfire Tips & Tutorial (Pro/E Wildfire 4.0, Wildfire 3.0, Wildfire 2.0 and 2001)

TIPS: Conic Round in Pro/ENGINEER Wildfire

TIPS: Conic Round in Pro/ENGINEER Wildfire

Version: Pro/E Wildfire, Wildfire2.0, Wildfire3.0, Wildfire4.0

Beside the default round (circular – rolling ball), rounds tool in Pro/ENINEER Wildfire consist of advanced sub-feature to help you in your modeling.

Below is a quick tip of conic rounds.

Use round tool Pro/E Wildfire round icon and select the desire round edge. Pro/E rounds dashboard will appears.

Pro/E Wildfire round dashboard

On the round dashboard, click the Sets menu. After that, choose the conic type from the round types list.

Pro/E Wildfire round type

Now, you will be provided with an additional dimension and grip which control the conic factor. Conic factor can be changed by dragging the grip or double click and change the dimension.

Conic Factor: 0.3

Pro/E Wildfire conic round

Conic Factor: 0.7

Pro/E Wildfire conic round

Conic factor vary between 0 and 1, the bigger value indicates more tangential to the neighbor surface and vise versa.The dynamic lightweight preview in Pro/E Wildfire updates instantly when you make any changes. This helps to predict the end result better.

Try the D1 x D2 Conic round as well. It gives you the result as below

Pro/E Wildfire D1 x D2 conic round is an independent website providing tips and tutorials for Pro/ENGINEER users.
ProENGINEER version covered: ProE 2001, Wildfire, wildfire 2.0, Wildfire 3.0 and Wildfire 4.0
Pro/ENGINEER Wildfire and Pro/INTRALINK are the registered trademark of PTC.
© 2006 - 2012

Top Desktop version