Pro/rNGINEER Wildfire Tips & Tutorial (Pro/E Wildfire 4.0, Wildfire 3.0, Wildfire 2.0 and 2001)

class="gkFeaturedItemTitle" TUTORIAL: About Pro/ENGINEER Wildfire Boundary Blend Feature

  • Created on Friday, 28 September 2007 11:01
  • Written by Administrator

TUTORIAL: About Pro/ENGINEER Wildfire Boundary Blend Feature

Version: Pro/E Wildfire, Wildfire 2.0, Wildfire 3.0, Wildfire 4.0

Boundary blend is an advanced surfacing tool in Pro/ENGINEER. Starting from Pro/E Wildfire, boundary blend has enhanced with new dashboard interface.

Pro/ENGINEER Wildfire Boundary Blend Feature

Boundary blend allows you to create a quilt from boundaries in one or two directions (U & V). The minimum curves / edges for one direction boundary blend quilt are 2 and the minimum curves / edges for two direction boundary blend quilt are 3. Apart of that, internal curves let you to create smooth boundary blend quilt thru the internal curves.

Read more: TUTORIAL: About Pro/ENGINEER Wildfire Boundary Blend Feature

class="gkFeaturedItemTitle" TUTORIAL: Create Boundary Blend Surface with Inner Boundaries in Pro/E Wildfire

  • Created on Monday, 27 August 2007 19:00
  • Written by Administrator

TUTORIAL: Create Boundary Blend Surface with Inner Boundaries in Pro/E Wildfire

Version: ProE Wildfire, Wildfire 2.0, Wildfire3.0, Wildfire 4.0

Boundary blend is one of the advanced surface features (parametric surface) in Pro/ENGINEER. Boundary blend feature can be created from 2 boundaries / curves and onwards. This tutorial show you on how to create boundary blend surface from 4 boundaries and 2 inner curves.

Boundary Blend Surface with Inner Boundaries in Pro/E Wildfire

Read more: TUTORIAL: Create Boundary Blend Surface with Inner Boundaries in Pro/E Wildfire

class="gkFeaturedItemTitle" TUTORIAL: (New Feature) Remove Surface in Pro/ENGINEER Wildfire 4.0

  • Created on Monday, 30 July 2007 10:33
  • Written by Administrator

TUTORIAL: (New Feature) Remove Surface in Pro/ENGINEER Wildfire 4.0

Version: ProE Wildfire4.0

Remove Surface is a new feature in Pro/ENGINEER Wildfire 4.0. It is used to remove unwanted surfaces / solid in ProE part file including the imported part from IGES and STEP file.

ProE Wildfire 4.0 Remove Surface feature

This tutorial shows the steps on removing the rib in an imported igs file. Download the IGES file used in the following remove surface tutorial here (IGES file for ProE Remove Surface Tutorial).

Read more: TUTORIAL: (New Feature) Remove Surface in Pro/ENGINEER Wildfire 4.0

class="gkFeaturedItemTitle" TUTORIAL: Create Boundary Blend Surface with 3 Boundaries in Pro/E Wildfire

  • Created on Monday, 23 July 2007 10:03
  • Written by Administrator

TUTORIAL: Create Boundary Blend Surface with 3 Boundaries in Pro/E Wildfire

Version: ProE Wildfire, Wildfire 2.0, Wildfire3.0, Wildfire 4.0

Boundary blend is one of the advanced surface features (parametric surface) in Pro/ENGINEER. Boundary blend feature can be created from 2 boundaries / curves and onwards. This tutorial walks you thru the steps on how to create a boundary blend quilt / surface for 3 boundaries in Pro/ENGINEER Wildfire.

ProE Boundary Blend tutorial intro

Download the ProE part file used in the following boundary blend tutorial here (ProE boundary blend with 3 boundaries file).

Read more: TUTORIAL: Create Boundary Blend Surface with 3 Boundaries in Pro/E Wildfire

class="gkFeaturedItemTitle" TUTORIAL: Create Boundary Blend Surface with 4 Boundaries in Pro/E Wildfire

  • Created on Sunday, 15 July 2007 22:53
  • Written by Administrator

TUTORIAL: Create Boundary Blend Surface with 4 Boundaries in Pro/E Wildfire

Version: ProE Wildfire, Wildfire 2.0, Wildfire3.0, Wildfire 4.0

Boundary blend tool interface has been modernized in Pro/ENGINEER since the 1st version of ProE Wildfire. The GUI is now consolidated in the Wildfire dashboard and it comes with powerful light weight preview. Boundaries selection and other options of the boundary blend tool also become flexible and interactive.

Boundary blend is categorized under the advanced surface feature (parametric surface) in Pro/ENGINEER. From its name, boundary blend surface, we can roughly know that it is a surface which is blended from the boundaries. You can create boundary blend feature from 2 boundaries / curves and onwards. There are a lot of options and tricks which you can play around with. This tutorial walks you thru the steps on how to create a boundary blend quilt / surface for 4 boundaries in Pro/ENGINEER Wildfire.

ProE Boundary Blend tutorial intro

This tutorial is good to use as the introduction to boundary blend feature and it should be the first tutorial to take if you don’t know anything about ProE boundary blend feature. Download the ProE part file used in the following boundary blend tutorial here (ProE boundary blend with 4 boundaries file).

 

Read more: TUTORIAL: Create Boundary Blend Surface with 4 Boundaries in Pro/E Wildfire

class="gkFeaturedItemTitle" TUTORIAL: Surface Modeling in Pro/E Wildfire – Thicken Surface (Bottle Tutorial 8)

  • Created on Saturday, 05 May 2007 23:23
  • Written by Administrator

TUTORIAL: Surface Modeling in Pro/E Wildfire – Thicken Surface (Bottle Tutorial 8)

Versions: Pro/E Wildfire, Wildfire2.0, Wildfire3.0

In this tutorial, we are going to convert the bottle’s model from surface to solid by using the thicken tool. Thicken tool is one of the tool for us to turn a surface model to solid model in Pro/ENGINEER.

ProE Wildfire thicken bottle tutorial

 

Read more: TUTORIAL: Surface Modeling in Pro/E Wildfire – Thicken Surface (Bottle Tutorial 8)

ProENGINEERtips.com is an independent website providing tips and tutorials for Pro/ENGINEER users.
ProENGINEER version covered: ProE 2001, Wildfire, wildfire 2.0, Wildfire 3.0 and Wildfire 4.0
Pro/ENGINEER Wildfire and Pro/INTRALINK are the registered trademark of PTC.
© 2006 - 2012 www.proengineertips.com

Top Desktop version


Deprecated: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in /home/proe/public_html/libraries/joomla/filter/input.php on line 652

Deprecated: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in /home/proe/public_html/libraries/joomla/filter/input.php on line 654