Pro/rNGINEER Wildfire Tips & Tutorial (Pro/E Wildfire 4.0, Wildfire 3.0, Wildfire 2.0 and 2001)

TUTORIAL: Creating a flat surface in proE Wildfire

TUTORIAL: Creating a flat surface in proE Wildfire

Versions: Wildfire, Wildfire2.0, Wildfire3.0

Flat surface is a planar surface created from closed boundary sketch. It is also called as Fill feature in Pro/ENGINEER. Flat surface is using the modernize interface since Wildfire version. Dashboard will appears when you hit the Fill Tool and you can choose to use either external sketch or internal sketch to create a Flat Surface.

Flat Surface in ProE Wildfire

1. Clicks file>new file new to create a new part...

2. To create a flat surface, click edit> fill tool Fill Icon and the fill tool dashboard appears

Wildfire Flat Surface dashboard

3. Next, press and hold the right mouse button (RMB), select Define Internal Sketch from the pops up menu.

Flat Surface menu

4. Select any datum plane that you want the flat surface to be placed and then hit the sketch button or press the middle mouse button (MMB) to start the sketch.

sketch

5. Create any close-loop sketch. Please note that flat surface could not been constructed by open sketch.

close loop sketch

6. Click the check button OK to confirm the sketch. You should get the light weight preview for the Flat Surface by now.

Flat Surface in ProE Wildfire

Flat Surface in ProE Wildfire

7. Finally, hit the check button OK on the dashboard to confirm the feature creation.

Flat Surface in ProE Wildfire

 

 

ProENGINEERtips.com is an independent website providing tips and tutorials for Pro/ENGINEER users.
ProENGINEER version covered: ProE 2001, Wildfire, wildfire 2.0, Wildfire 3.0 and Wildfire 4.0
Pro/ENGINEER Wildfire and Pro/INTRALINK are the registered trademark of PTC.
© 2006 - 2012 www.proengineertips.com

Top Desktop version